About This Program
Take your engineering career to the next level with Kent State's Bachelor of Science in Mechanical Engineering Technology program. With a focus on both theory and practice, this program prepares you for a wide range of mechanical engineering technology roles in industries such as aerospace, automotive, manufacturing and more. You'll have access to state-of-the-art facilities and experienced faculty who are dedicated to helping you succeed. Read more...
Contact Information
Program Delivery
Examples of Possible Careers and Salaries*
Mechanical engineering technologists and technicians
- 3.1% about as fast as the average
- 43,500 number of jobs
- $58,230 potential earnings
Calibration technologists and technicians and engineering technologists and technicians, except drafters, all other
- 2.1% slower than the average
- 91,600 number of jobs
- $64,190 potential earnings
Electro-mechanical and mechatronics technologists and technicians
- 3.0% about as fast as the average
- 14,600 number of jobs
- $59,800 potential earnings
Mechanical engineers
- 3.9% about as fast as the average
- 316,300 number of jobs
- $90,160 potential earnings
Accreditation
The B.S. degree in Mechanical Engineering Technology is accredited by the Association of Technology, Management and Applied Engineering (ATMAE).
* Source of occupation titles and labor data comes from the U.S. Bureau of Labor Statistics' Occupational Outlook Handbook. Data comprises projected percent change in employment over the next 10 years; nation-wide employment numbers; and the yearly median wage at which half of the workers in the occupation earned more than that amount and half earned less.
Admission Requirements
The university affirmatively strives to provide educational opportunities and access to students with varied backgrounds, those with special talents and adult students who graduated from high school three or more years ago.
First-Year Students on the Kent Campus: First-year admission policy on the Kent Campus is selective. Admission decisions are based upon cumulative grade point average, strength of high school college preparatory curriculum and grade trends. Students not admissible to the Kent Campus may be administratively referred to one of the seven regional campuses to begin their college coursework. For more information, visit the admissions website for first-year students.
First-Year Students on the Regional Campuses: First-year admission to Kent State’s campuses at Ashtabula, East Liverpool, Geauga, Salem, Stark, Trumbull and Tuscarawas, as well as the Twinsburg Academic Center, is open to anyone with a high school diploma or its equivalent. For more information on admissions, contact the Regional Campuses admissions offices.
International Students: All international students must provide proof of English language proficiency unless they meet specific exceptions. For more information, visit the admissions website for international students.
Transfer Students: Students who have attended any other educational institution after graduating from high school must apply as undergraduate transfer students. For more information, visit the admissions website for transfer students.
Former Students: Former Kent State students or graduates who have not attended another college or university since Kent State may complete the reenrollment or reinstatement form on the University Registrar’s website.
Admission policies for undergraduate students may be found in the University Catalog.
Some programs may require that students meet certain requirements before progressing through the program. For programs with progression requirements, the information is shown on the Coursework tab.
Roadmap
This roadmap is a recommended semester-by-semester plan of study for this major. However, courses designated as critical (!) must be completed in the semester listed to ensure a timely graduation.
Plan of Study Grid Semester One |
COMM 15000 | INTRODUCTION TO HUMAN COMMUNICATION (KADL) | 3 |
ENGR 13585 | COMPUTER AIDED ENGINEERING GRAPHICS | 3 |
UC 10001 | FLASHES 101 | 1 |
Mathematics Elective | 3 |
Kent Core Requirement | 3 |
Kent Core Requirement | 3 |
| Credit Hours | 16 |
Semester Two |
ENGR 11000 | INTRODUCTION TO ENGINEERING | 3 |
ENGR 23585 | COMPUTER AIDED DESIGN II | 3 |
PHY 13001 & PHY 13021
| GENERAL COLLEGE PHYSICS I (KBS) and GENERAL COLLEGE PHYSICS LABORATORY I (KBS) (KLAB)
or GENERAL UNIVERSITY PHYSICS I (KBS) (KLAB) | 5 |
Mathematics Elective | 3-5 |
| Credit Hours | 14 |
Semester Three |
ECON 22060 | PRINCIPLES OF MICROECONOMICS (KSS) | 3 |
ENGR 20000 | PROFESSIONAL DEVELOPMENT IN ENGINEERING | 1 |
ENGR 20002 | MATERIALS AND PROCESSES | 3 |
PHY 13002 & PHY 13022
| GENERAL COLLEGE PHYSICS II (KBS) and GENERAL COLLEGE PHYSICS LABORATORY II (KBS) (KLAB)
or GENERAL UNIVERSITY PHYSICS II (KBS) (KLAB) | 5 |
Kent Core Requirement | 3 |
| Credit Hours | 15 |
Semester Four |
ACCT 23020 | INTRODUCTION TO FINANCIAL ACCOUNTING | 3 |
CHEM 10050 | FUNDAMENTALS OF CHEMISTRY (KBS) | 3 |
ENG 20002 | INTRODUCTION TO TECHNICAL WRITING | 3 |
Electricity and Electronics Electives | 4-7 |
Kent Core Requirement | 3 |
| Credit Hours | 16 |
Semester Five |
ENGR 30001 | APPLIED THERMODYNAMICS | 3 |
ENGR 33031 | PROGRAMMABLE LOGIC CONTROLLERS | 3 |
ENGR 33111
| STATICS AND STRENGTH OF MATERIALS
or STATICS and STRENGTH OF MATERIALS | 3-6 |
ENGR 47200 | SYSTEMS ENGINEERING | 3 |
Programming Elective(s) | 3-4 |
| Credit Hours | 15 |
Semester Six |
ENGR 31000 | CULTURAL DYNAMICS TECHNOLOGY (DIVD) (WIC) | 3 |
ENGR 33033 | HYDRAULICS/PNEUMATICS | 3 |
ENGR 33364 | METALLURGY AND MATERIALS SCIENCE | 3 |
Kent Core Requirement | 3 |
Kent Core Requirement | 3 |
| Credit Hours | 15 |
Semester Seven |
ENGR 31016 | MANUFACTURING TECHNOLOGY | 3 |
ENGR 43550 | COMPUTER-AIDED MANUFACTURING | 3 |
ENGR 43580 | COMPUTER-AIDED MACHINE DESIGN | 3 |
Engineering (ENGR) Elective | 3 |
General Elective | 3 |
| Credit Hours | 15 |
Semester Eight |
ENGR 33333 | 3 |
ENGR 43080 | INDUSTRIAL AND ENVIRONMENTAL SAFETY | 3 |
ENGR 43899 | APPLIED ENGINEERING CAPSTONE (ELR) | 3 |
Engineering (ENGR) Elective | 3 |
General Elective | 2 |
| Credit Hours | 14 |
| Minimum Total Credit Hours: | 120 |
University Requirements
All students in a bachelor's degree program at Kent State University must complete the following university requirements for graduation.
NOTE: University requirements may be fulfilled in this program by specific course requirements. Please see Program Requirements for details.
Program Learning Outcomes
Graduates of this program will be able to:
- Apply knowledge, techniques, skills and modern tools of mathematics, science, engineering and technology to solve broadly defined engineering problems appropriate to the discipline.
- Design systems, components or processes meeting specified needs for broadly defined engineering problems appropriate to the discipline.
- Apply written, oral and graphical communication in broadly defined technical and non-technical environments; and an ability to identify and use appropriate technical literature.
- Conduct standard tests, measurements and experiments and analyze and interpret the results to improve processes.
- Function effectively as a member as well as a leader on technical teams.
Full Description
The Bachelor of Science degree in Mechanical Engineering Technology teaches design, operation, installation, maintenance and analysis of machinery. The program prepares students to become highly technical professionals in current and emerging fields using mechanical and computer-aided engineering. Students learn to develop innovative solutions to problems encountered in manufacturing.
Information on the program’s education objectives and student enrollment and graduation data can be found on the college website.
Applicants to this program should understand that this is a math-intensive program.
Students may apply early to the Master of Engineering Technology degree (Mechanical Engineering Technology concentration) and double count 9 credit hours of graduate courses toward both degree programs. See the Combined Bachelor's/Master's Degree Program policy in the University Catalog for more information.